Pattern printed the wrong size? Find the cause and fix it
Free. No sign-up. Your file never leaves this device.
If the test square measures wrong, every piece is off by the same amount. Usually it's a print setting. If the settings are right and it's still off, enter what you measured and Sewtile scales the PDF by exactly the difference.
How it works
- Print the pattern's test square, or our test square page, at "Actual size" with "Fit to page" off, and measure it.
- Still wrong? Pick the pattern PDF here and type what the square measured and what it should be.
- Download the corrected PDF, print the page with the test square again and check it before you print the rest.
Print a test square first to check your printer settings.
Good to know
- Scale between 10% and 1000%.
- Sewtile scales width and height by the same amount.
- Password-protected or locked PDFs won't open.
Other tools
Questions
Why did my pattern print too small?
Almost always the print dialog. "Fit to page", "Shrink oversized pages" and "Scale to fit" shrink the page to the printable area, often to 94–97%. Choose "Actual size" or 100%. Printing from a phone can scale too, so use a computer if you can.
Why did it print too big?
That is rarer. Usually a custom scale is left in the print dialog from an earlier job, or a copy shop fitted the file to a bigger sheet. Set the scale back to 100% and print the square again.
The square is off in one direction only. What does that mean?
Some printers move the paper slightly faster or slower than they should, so measurements along the paper come out a little off. Under 1 mm on a 5 cm square is normally fine. Sewtile scales both directions equally, so if it's more, correct for the direction that matters most, usually the length of long pieces.
How close does the square need to be?
Aim for less than 1 mm on a 5 cm square. Even that is 2%, which adds up to 2 cm around a 100 cm skirt, so the closer the better.